Nullifire FF197 Fire Rated PU Construction Foam 750ml

Product Overview:

FF197 is a modified, single component, fire rated polyurethane foam used to seal door frames, window frames and linear gaps throughout the fire rated areas of a building.

Usage/purpose
FF197 is used to seal door frames and linear gaps throughout the fire rated areas of a building.

Always read SDS, pre-application guidance and relevant application detail prior to application. Ensure the latest documents are downloaded prior to every project commencement.

• Use in well ventilated conditions.
• As with all PU foams, FF197 will not adhere to Teflon, polyethylene or silicone coated surfaces.
• The cured foam is adversely affected by UV light and should be covered with a suitable sealant such as FS703 or FS702.
• For nozzle application, invert can and direct nozzle into gap and press gently on the adaptor to establish the correct flow rate.
• Ensure the surface to be cleaned is solvent resistant prior to using or applying AA290 as a cleaning agent.
• AA290 TDS & SDS are available at www.illbruck.com/AA290.
•  
• Safety data sheet must be read and understood before use.
• Extremely flammable aerosol. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
• No smoking.

Product benefits

• Tested to BS EN 1634-1 (fire door): FD60 performance achieved.
• Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance (coated or uncoated).
• Tested without architrave (fire door).
• Tested with plastic packers (fire door).
• Gaps up to 35 mm (fire door).
• Excellent acoustic performance - up to 62 dB.
• Tack free in 10 minutes.
• 2-in-1 gun & nozzle canister.