Gorilla Heavy Duty Grab Adhesive White 290ml - GRGASAPGA

Product Overview:

Gorilla® Heavy-Duty Grab Adhesive is the all-purpose way to bond building materials. Extremely versatile, it grabs and bonds virtually anything instantly. Suitable for use indoors or out, even underwater, for an extra-tough bond which will last. Its flexible, easy flow formula means it can even be used for gap filling and is paintable.

Product Benefits:

• Ultra-High Strength
• Holds Instantly
• Gap Filling
• Withstands extreme temperatures
• Even Bonds Underwater

Gorilla Heavy Duty Grab Adhesive is so versatile, it grabs virtually anything instantly. The flexible, gap filling formula provides a long-lasting, heavy duty bond.   This is a grab adhesive that’s 100% waterproof and withstands extreme temperatures, meaning you can use it indoors or out, even underwater, for an extra-tough bond that’ll last.

How to Use:

• Prepare: All surfaces should be clean and free of dirt, grease, oil and old adhesive. Cut off the seal at the top of the cartridge above the screw thread. Screw on nozzle and remove cap. Cut nozzle to desired bead size using guides on nozzle for reference. Insert cartridge into cartridge gun.
• Load: Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut the desired bead size. Insert into cartridge gun.
• Apply: Squeeze adhesive on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.
• Press: Within 5 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening.
• Full cure achieved in 24 hours.